Bathroom

Bathroom taps: basin, bidet and bath taps

Bathroom taps are what you touch most every day, so choose them for their body and spout before the finish. The showroom includes single-lever taps for the washbasin, bidet and bath in brass or stainless steel, in chrome, matt black, brushed or gold finishes. Spout height and compatibility with the washbasin decide more than colour.

What changes between Comfort, High and Premium

Taps control the water in the bathroom and are the most visible finishing touch on the washbasin, bidet and bath.

Comfort

The essentials, done well

For a bathroom with moderate or secondary use where a current design without complications is the aim.

  • Single-lever basin and bidet taps
  • Stainless steel or brass body
  • Matt black, satin grey and chrome finishes

Watch out: This range does not usually include the anti-limescale system, and the painted finish is cleaned without abrasives.

Included in the base quote.

High

Manufacturer brands and better finishes

For the main bathroom in daily use, with anti-limescale on almost all models.

  • Anti-limescale system on most models
  • Brushed stainless steel basin taps with a medium or low spout
  • Two-outlet bath tap in chrome-plated brass

Watch out: Some low spouts, of about 9 cm, leave little space under the outlet: check compatibility with the washbasin.

+ ~€28 per unit over Comfort (material only, VAT incl.)

Premium

Superior design and performance

For those who prefer well-known manufacturers and finishes with more presence.

  • Brass body on every model
  • Manufacturers such as Grohe and Paini
  • Gloss chrome and satin gold finishes
  • Anti-limescale on the bath and bidet taps

Watch out: Gloss chrome shows fingerprints and drops, and every finish needs a soft cloth after use.

+ ~€55 per unit over Comfort (material only, VAT incl.)

Installation is quoted separately. Indicative showroom. Brand and model are replaced by an equivalent in the same range depending on availability. The MB-xxxx references identify the material in your quote.

Showroom products

Real examples from each range. Open any of them for its data sheet.

12 options

How to choose

Spout height

A tall spout, with about 15 cm of clearance under the outlet, suits countertop basins. On a pedestal or vanity unit, a spout with about 9 cm under the outlet reduces splashing. Measure the space before you decide.

Material and finish

Brass is the usual body and comes in chrome, gold or brushed finishes. Stainless steel is offered in matt black, silver or satin grey. Near the sea, on the Costa del Sol, painted finishes need gentle cleaning.

Cold-open and anti-limescale

With cold-open, the centred lever gives cold water only, so the boiler does not switch on for short uses. The anti-limescale system, found on several High and Premium models, makes limescale easier to clean.

Tap type and outlets

Basin, bidet and bath each take a different tap. On a bath, a two-outlet model supports both a spout and a shower handset. Define the whole set at the same time so finishes are not mixed by accident.

Common mistakes

  • Buying the tap before measuring the basin: a tall spout on a shallow basin splashes, and a low one on a countertop leaves little room for your hands.
  • Mixing finishes without a plan, such as chrome on the basin and matt black on the bath, and ending up with a bathroom that lacks unity.
  • Choosing a bath tap without checking the outlets: if there is a shower handset, you need a two-way model.
Frequently asked questions

We answer your questions

Shall we look at it in your renovation?

We will prepare your quote with the range you choose. 2-year workmanship warranty.

WhatsApp612 286 273

We use our own and third-party cookies and similar technologies (Google, Meta, Microsoft and OpenAI) to analyse how the site is used and measure our advertising. With “Essential only”, no measurement cookies are set and Clarity and OpenAI are not activated. You can change your choice at any time via “Cookie settings” at the bottom of the page. Cookie policy