Lighting

LED strips and profiles for kitchens, wardrobes and ceilings

An LED strip is chosen by voltage (12 V, 24 V or 230 V), lumens, colour temperature, IP rating and the distance between cuts. The showroom includes strips and kits of 0.55 to 10 metres, with warm, neutral or cool light, cuts every 1 to 25 cm and IP20 or IP44 protection.

What changes between Comfort, High and Premium

Provides indirect and ambient light on ceilings, in kitchens and in wardrobes, with a low profile that blends into the building work.

Comfort

The essentials, done well

Supporting light under kitchen units, in display cabinets, along plinths or inside wardrobes where there is no damp.

  • 12 and 24 V strips and 220-240 V kits
  • Warm, neutral or cool light (3000 to 6000 K)
  • Cuts every 5 or 10 cm

Watch out: Some kits are very low power: they work for ambience, not for task lighting.

Included in the base quote.

High

Manufacturer brands and better finishes

Kitchens, wardrobes and ceilings with everyday indirect light and more light output.

  • Up to 1,800 lm per metre at 12 V (Alverlamp)
  • Kit with touch sensor and transformer
  • 5 m strip with switch, 220-240 V

Watch out: All are IP20: where there are splashes, change product or protect the strip.

+ ~€17 per unit over Comfort (material only, VAT incl.)

Premium

Superior design and performance

Long runs along ceilings or furniture and damp areas, with more output and control of tone.

  • 5 and 10 metre kits, 220-240 V
  • Up to 5,000 lm over 5 metres
  • Adjustable tone of 2700 to 6500 K (Eglo)

Watch out: The 220-240 V ones need an installer; make and model are indicative and are replaced by an equivalent in the same range.

+ ~€36 per unit over Comfort (material only, VAT incl.)

Installation is quoted separately. Indicative showroom. Brand and model are replaced by an equivalent in the same range depending on availability. The MB-xxxx references identify the material in your quote.

Showroom products

Real examples from each range. Open any of them for its data sheet.

12 options

How to choose

Voltage and transformer

12 V and 24 V strips need a transformer; 220-240 V ones run off the mains. At low voltage, the longer the strip, the dimmer the far end; 24 V loses less than 12 V.

Lumens and colour temperature

They run between 200 lm in a short kit and 5,000 lm over 5 metres. Warm light (3000 K) creates ambience; neutral (4000 K) suits worktops; cool (6000 K or more) suits technical areas. What counts is lumens per metre.

IP rating and area

Almost all are IP20, for dry areas only; the 5-metre one with IP44 works in bathrooms. Next to the sink or on covered terraces on the Costa del Sol, choose IP44 or higher.

Cut point and profile

The cut spacing, 1 to 25 cm depending on the model, sets how often the strip can be cut. An aluminium profile with a diffuser improves the look, protects the strip and helps dissipate heat.

Common mistakes

  • Buying an IP20 strip for an area with splashes or steam, such as next to the sink.
  • Extending 12 V strips without a second power feed, so the end shines less than the start.
  • Sticking down a high-power strip without a profile to help dissipate the heat.
Frequently asked questions

We answer your questions

Shall we look at it in your renovation?

We will prepare your quote with the range you choose. 2-year workmanship warranty.

WhatsApp612 286 273

We use our own and third-party cookies and similar technologies (Google, Meta, Microsoft and OpenAI) to analyse how the site is used and measure our advertising. With “Essential only”, no measurement cookies are set and Clarity and OpenAI are not activated. You can change your choice at any time via “Cookie settings” at the bottom of the page. Cookie policy