Paint and finishes

Interior enamel paint for doors, windows and furniture

Interior enamel paint is chosen by the surface (wood, iron or aluminium), the finish (matt, satin or gloss) and the use: doors, windows, furniture or radiators. The showroom offers tins of 0.5 to 4 litres, average coverage of 10 to 14 m²/L and colours ranging from white and beige to black or bright yellow.

What changes between Comfort, High and Premium

Protects and finishes joinery, furniture and radiators, and sets the final look of doors and windows.

Comfort

The essentials, done well

Room-by-room renovations repainting joinery or furniture with a general-purpose enamel.

  • Satin and gloss in white and beige
  • 2.5 and 4 L tins
  • Coverage of 10 to 12 m²/L
  • Uses for furniture, windows and furnishings

Watch out: For radiators or heavily handled pieces, check that the product sheet states that use.

Included in the base quote.

High

Manufacturer brands and better finishes

Doors, windows and everyday joinery, with a wider choice of colours and tin sizes.

  • 0.75 L Titan for doors, windows, radiators and furniture
  • 4 L satin lacquer for joinery
  • Matt multi-surface enamel

Watch out: Intense colours, such as gloss black, show every flaw in the wood.

+ ~€8 per litre over Comfort (material only, VAT incl.)

Premium

Superior design and performance

Exposed joinery, radiators and furniture that are touched daily and call for a careful finish.

  • Water-based for radiators
  • Titan and Bruguer in gloss or satin white
  • Coverage of up to 14 m²/L

Watch out: Make and model are indicative and are replaced by an equivalent in the same range; the final colour may vary from the sample.

+ ~€15 per litre over Comfort (material only, VAT incl.)

Installation is quoted separately. Indicative showroom. Brand and model are replaced by an equivalent in the same range depending on availability. The MB-xxxx references identify the material in your quote.

Showroom products

Real examples from each range. Open any of them for its data sheet.

12 options

How to choose

Surface and intended use

The product sheet states whether the enamel is for wood, iron, aluminium, doors, windows or radiators. Those meant for radiators say so in their name: respect the use stated on each tin.

Matt, satin or gloss

Gloss shows every flaw and wipes clean easily. Satin is the most versatile on doors and furniture; matt hides uneven joinery.

Water-based or solvent-based

Water-based ones smell less and clean up with water; in the showroom only one states it, among the Premium radiator enamels. Solvent-based ones smell more and need ventilation. For the rest, the product sheet does not specify the base: confirm it before applying.

Preparation and coverage

Sanding, cleaning and priming decide how long it lasts. A door has around 3 to 4 m² across both faces: at two coats and 10 m²/L, less than a litre. Near the sea on the Costa del Sol, iron can rust sooner: remove the rust first.

Common mistakes

  • Applying enamel without sanding or cleaning the surface, so the finish lifts with use.
  • Choosing gloss for flawed joinery, so every knock and joint shows.
  • Using a joinery enamel on a radiator without checking it is suitable.
Frequently asked questions

We answer your questions

Paint and finishes

Shall we look at it in your renovation?

We will prepare your quote with the range you choose. 2-year workmanship warranty.

WhatsApp612 286 273

We use our own and third-party cookies and similar technologies (Google, Meta, Microsoft and OpenAI) to analyse how the site is used and measure our advertising. With “Essential only”, no measurement cookies are set and Clarity and OpenAI are not activated. You can change your choice at any time via “Cookie settings” at the bottom of the page. Cookie policy