Kitchen

Kitchen worktops: laminate and solid wood in three ranges

A kitchen worktop takes cuts, knocks, heat and water for years, so it should be chosen for its material and not just its colour. The showroom selection is mostly laminate boards, 13 to 38 mm thick, with one solid wood option. The sink and hob cut-outs are the most delicate points.

What changes between Comfort, High and Premium

The worktop is the working surface of the kitchen: it takes daily use, carries the sink and hob and sets the look.

Comfort

The essentials, done well

Everyday kitchens that want a simple laminate worktop that is easy to clean.

  • Laminate on chipboard, 28 to 30 mm
  • Matt finishes in granite, beech, white or anthracite
  • Lengths of 180 to 246 cm and one moisture-resistant option

Watch out: Some spec sheets in this range state low resistance to knocks and scratches: it is worth reading them.

Included in the base quote.

High

Manufacturer brands and better finishes

Kitchens with more worktop length or a wood look, in laminate or solid wood.

  • 30 mm laminate in lengths of up to 360 cm
  • Strip beech and slatted walnut finishes
  • Solid birch, 26 mm, with a bevelled edge

Watch out: Solid wood needs regular oil or varnish and more care with water and heat.

+ ~€18 per unit over Comfort (material only, VAT incl.)

Premium

Superior design and performance

Heavily used kitchens or long worktop runs, where extra thickness matters.

  • 38 mm laminate in lengths of up to 366 cm
  • Oak, white with gloss dots and white marble finishes
  • Compact 13 mm variant with a slim look

Watch out: More thickness is not immunity: water at a poorly sealed cut swells the board just the same. Brand and model are indicative and are replaced by an equivalent in the same range, subject to availability.

+ ~€80 per unit over Comfort (material only, VAT incl.)

Installation is quoted separately. Indicative showroom. Brand and model are replaced by an equivalent in the same range depending on availability. The MB-xxxx references identify the material in your quote.

Showroom products

Real examples from each range. Open any of them for its data sheet.

12 options

How to choose

Laminate or solid wood

Laminate wipes clean with a cloth, but a knock on the edge or water at an unsealed cut damages the board. Solid wood can be repaired, although it needs regular oil or varnish and, in a coastal home like those in Marbella, it reacts to humidity.

Thickness and edge

Thicknesses in the showroom range between 26 and 38 mm, with a compact 13 mm variant. A straight edge looks more contemporary; a rounded or bevelled one is softer to the touch.

Heat and water

The spec sheets give the heat resistance and distinguish moisture-resistant boards, which suit the area by the sink better. Even so, use trivets and seal the cuts.

Length and joints

The boards are 180 to 366 cm long and around 63 cm deep. A longer board means fewer joints and fewer weak points against water.

Common mistakes

  • Leaving the sink or hob cut-out unsealed, which lets water into the board.
  • Setting pans straight from the heat on the laminate, even if the spec sheet states heat resistance.
  • Ordering the worktop before the sink and hob are chosen, then cutting the openings to approximate measurements.
Frequently asked questions

We answer your questions

Shall we look at it in your renovation?

We will prepare your quote with the range you choose. 2-year workmanship warranty.

WhatsApp612 286 273

We use our own and third-party cookies and similar technologies (Google, Meta, Microsoft and OpenAI) to analyse how the site is used and measure our advertising. With “Essential only”, no measurement cookies are set and Clarity and OpenAI are not activated. You can change your choice at any time via “Cookie settings” at the bottom of the page. Cookie policy