Kitchen

Kitchen sinks: materials, bowls and fitting by range

A kitchen sink is chosen on three things: how it is fitted, the size of the base unit that receives it and the material of the bowl. The showroom has stainless steel, resin and ceramic, fitted undermount, flush or with the worktop included. The size of the opening and the worktop are decided before the model.

What changes between Comfort, High and Premium

The sink is the water zone of the kitchen: its fitting and size shape the base unit, the worktop and the tap.

Comfort

The essentials, done well

Small kitchens or second homes that need a compact single-bowl sink.

  • Single bowl, round or square, 43 to 48 cm
  • Manufacturers such as Teka and Rodi
  • Size suited to reduced base units

Watch out: A single compact bowl limits work with large trays and pans. Brand and model are indicative and are replaced by an equivalent in the same range, subject to availability.

Included in the base quote.

High

Manufacturer brands and better finishes

Family kitchens that need a bigger bowl, a uniform material or an integrated worktop.

  • Resin sink for undermount fitting
  • Teka single-bowl model, 71 cm
  • 86 cm model with worktop included

Watch out: Undermount or integrated fitting conditions the worktop you choose: the two are decided together.

Difference: quoted according to the model.

Premium

Superior design and performance

Kitchens where the sink is the centrepiece and a fine or distinctive material is wanted.

  • Ceramic with flush fitting
  • Stainless steel with a gold PVD finish
  • Teka single-bowl, 71 cm, in stainless steel

Watch out: Ceramic and PVD finishes need gentle cleaning and protection from sharp knocks.

Difference: quoted according to the model.

Installation is quoted separately. Indicative showroom. Brand and model are replaced by an equivalent in the same range depending on availability. The MB-xxxx references identify the material in your quote.

Showroom products

Real examples from each range. Open any of them for its data sheet.

12 options

How to choose

Type of fitting

Undermount and flush sinks leave the rim below or level with the worktop and are easier to clean, but they need a perfectly sealed cut and a worktop that tolerates water.

Sizes and base unit

Bowls 43 to 48 cm per side fit small units; models of 71 to 86 cm need a wider base unit. The cut-out size, when the spec sheet gives it, is the one that rules for cutting the opening.

Bowl material

Stainless steel stands up to knocks, though it shows limescale and scratches. Resin gives a uniform look; in the showroom, in beige. Ceramic is hard and glossy, but a sharp knock can chip it.

Bowls and tap

A large bowl takes trays and pans; two bowls separate washing from rinsing, with smaller bowls. A high spout over a shallow bowl splashes, so sink and tap are chosen together.

Common mistakes

  • Choosing the sink by its outer size and not by the cut-out size, which is the one that governs cutting the worktop.
  • Fitting undermount on a board that does not tolerate water, or with the cut unsealed.
  • Buying sink and tap separately without checking spout height, bowl depth and tap hole.
Frequently asked questions

We answer your questions

Shall we look at it in your renovation?

We will prepare your quote with the range you choose. 2-year workmanship warranty.

WhatsApp612 286 273

We use our own and third-party cookies and similar technologies (Google, Meta, Microsoft and OpenAI) to analyse how the site is used and measure our advertising. With “Essential only”, no measurement cookies are set and Clarity and OpenAI are not activated. You can change your choice at any time via “Cookie settings” at the bottom of the page. Cookie policy