Flooring and skirting

Skirting boards and finishing profiles: materials and ranges

A skirting board finishes the junction between floor and wall and hides the expansion gap of floating floors. The showroom includes MDF, porcelain stoneware and polystyrene skirting boards, plus aluminium profiles for joints and edges. Material, height and edge shape decide how they resist mop water and how the whole looks with the floor.

What changes between Comfort, High and Premium

Skirting boards and profiles close off the floor: they protect the wall, cover expansion gaps and finish the change of flooring.

Comfort

The essentials, done well

Renovations that need a simple finish, in white or to match a ceramic floor.

  • White MDF, 243 x 7 cm
  • Porcelain stoneware, 60 x 10 cm, in cement tones
  • Faus Decor and Pamesa as manufacturers

Watch out: The 9 mm MDF is damaged by knocks and moisture, and the 60 cm porcelain needs many cuts and joints.

Included in the base quote.

High

Manufacturer brands and better finishes

Homes that want a sturdier or coloured skirting board, in white, grey or wood tones.

  • MDF 14 to 16 mm thick
  • Heights of 7, 7.8 and 10 cm
  • Dimoldura and Faus Decor as manufacturers

Watch out: It is still MDF: if the lacquer is damaged it tolerates water poorly, so seal the cuts.

+ ~€5 per unit over Comfort (material only, VAT incl.)

Premium

Superior design and performance

Areas that are mopped often or where a water-resistant finish is wanted.

  • Polystyrene, 8 to 9.5 cm, with a square edge
  • Arbiton as manufacturer
  • Slate-coloured aluminium beading, 16 x 11 mm

Watch out: A square edge needs well-cut corners and a smooth wall. Brand and model are indicative and are replaced by an equivalent in the same range, subject to availability.

+ ~€8 per unit over Comfort (material only, VAT incl.)

Installation is quoted separately. Indicative showroom. Brand and model are replaced by an equivalent in the same range depending on availability. The MB-xxxx references identify the material in your quote.

Showroom products

Real examples from each range. Open any of them for its data sheet.

12 options

How to choose

Material and water

MDF is the most common and takes a white lacquer, but it swells if moisture reaches it. Polystyrene stands up well to moisture. Porcelain stoneware is the hardest and goes with ceramic floors.

Height and proportion

In the showroom, skirting boards are 7 to 10 cm high. They must cover the expansion gap of the floor and stay in proportion with the ceiling height: a very tall one overloads a small room.

Edge and style

A rounded edge softens the profile and is more classic. A square edge looks more contemporary, but demands very exact corner cuts and well-levelled walls.

Finishing profiles

Profiles solve joints, edges and expansion gaps that the skirting board does not cover, like the aluminium beading in the showroom. Decide their type and colour with the floor, not at the end.

Common mistakes

  • Fixing the skirting board to a wall without checking that it is flat, so a gap is left behind it.
  • Using MDF in areas with a lot of water without sealing the cuts or protecting the ends.
  • Leaving the transition profiles to the end and finding there is no clean solution for the change of floor.
Frequently asked questions

We answer your questions

Shall we look at it in your renovation?

We will prepare your quote with the range you choose. 2-year workmanship warranty.

WhatsApp612 286 273

We use our own and third-party cookies and similar technologies (Google, Meta, Microsoft and OpenAI) to analyse how the site is used and measure our advertising. With “Essential only”, no measurement cookies are set and Clarity and OpenAI are not activated. You can change your choice at any time via “Cookie settings” at the bottom of the page. Cookie policy