Flooring and skirting

Laminate flooring: thickness, bevel and water resistance

Laminate flooring is an HDF board with a decorative layer that imitates wood, stone or other finishes. Every model in the showroom is AC5, a high abrasion-resistance class, and is 7 to 10 mm thick. The real difference between one model and another lies in thickness, moisture resistance, bevel and compatibility with underfloor heating.

What changes between Comfort, High and Premium

Laminate flooring is a floating HDF floor that imitates wood and wears well.

Comfort

The essentials, done well

Bedrooms, living rooms and dry rooms, with a simple floor and good wear resistance.

  • Manufacturers such as Finsa and Kastamonu
  • Three of the four models are compatible with underfloor heating
  • One model with 24-hour water resistance

Watch out: Thicknesses of 7 and 8 mm need a very flat subfloor, and three of the four models are not suitable for damp rooms.

Included in the base quote.

High

Manufacturer brands and better finishes

Homes with more traffic or areas somewhat more exposed to moisture.

  • Kaindl and Kronospan as manufacturers
  • V-groove bevel on four sides in two models
  • 10 mm model with 100-hour water resistance, suitable for damp rooms

Watch out: The 24-hour water-resistant model in this range is not suitable for damp rooms according to its spec sheet. Brand and model are indicative and are replaced by an equivalent in the same range, subject to availability.

+ ~€4 per m² over Comfort (material only, VAT incl.)

Premium

Superior design and performance

Large or heavily used rooms where a marked joint or water resistance is wanted.

  • Kronoswiss as manufacturer
  • Thicknesses of 8 and 10 mm
  • White 8 mm model with 100-hour water resistance

Watch out: Two Kronoswiss models are not compatible with underfloor heating: check the spec sheet.

+ ~€13 per m² over Comfort (material only, VAT incl.)

Installation is quoted separately. Indicative showroom. Brand and model are replaced by an equivalent in the same range depending on availability. The MB-xxxx references identify the material in your quote.

Showroom products

Real examples from each range. Open any of them for its data sheet.

12 options

How to choose

AC class and thickness

AC5 means high wear resistance, suitable for heavy traffic. Since every showroom model meets it, thickness matters more: at 7 to 10 mm, it usually adds rigidity and a better sound underfoot.

Moisture and water

HDF swells with standing water. Some models state water resistance of 24 or 100 hours, but that does not always mean they suit bathrooms: the spec sheet shows compatibility with damp rooms.

Underfloor heating

Not all are compatible with low-temperature underfloor heating: the showroom has models that are and others that are not, so check the spec sheet.

Bevel and joint

Without a bevel, the planks read as one continuous surface; with a V-groove on four sides, each plank stands out like a board. In coastal homes, the perimeter expansion gap matters more because of the ambient humidity.

Common mistakes

  • Assuming that ‘water-resistant for 24 hours’ means suitable for a bathroom, without checking the spec sheet.
  • Fitting without a perimeter expansion gap, so the floor lifts as it expands.
  • Laying on an uneven or damp subfloor and trusting the underlay to absorb it.
Frequently asked questions

We answer your questions

Shall we look at it in your renovation?

We will prepare your quote with the range you choose. 2-year workmanship warranty.

WhatsApp612 286 273

We use our own and third-party cookies and similar technologies (Google, Meta, Microsoft and OpenAI) to analyse how the site is used and measure our advertising. With “Essential only”, no measurement cookies are set and Clarity and OpenAI are not activated. You can change your choice at any time via “Cookie settings” at the bottom of the page. Cookie policy