Flooring and skirting

Wood flooring: solid wood and engineered parquet by range

Solid wood flooring and parquet are wood floors with different behaviour. Solid wood flooring is a single piece of timber (pine or fir in the showroom); engineered (multi-layer) parquet has an oak top layer over other layers and moves less with humidity. Format, finish and thickness define the look, and the subfloor determines how it ages.

What changes between Comfort, High and Premium

Solid wood flooring or parquet brings real wood to the floor and needs a dry subfloor and some upkeep.

Comfort

The essentials, done well

Dry rooms in normal use where real wood is wanted, even with a rustic look.

  • Tongue-and-groove solid pine or fir flooring
  • Engineered natural oak, satin or matt
  • Thicknesses of 14 to 19 mm

Watch out: Pine and fir mark easily, and solid wood flooring reacts to humidity more than engineered parquet.

Included in the base quote.

High

Manufacturer brands and better finishes

Homes that want a rustic or light oak parquet with more stability.

  • Engineered white or natural oak, matt
  • Manufacturers such as Intasa and Tarkett
  • Varnished or brushed finish

Watch out: The 60 cm Tarkett planks are 11 mm thick in total, against 14 mm for others: ask about the oak layer.

Difference: quoted according to the model.

Premium

Superior design and performance

Large rooms with big planks in white or grey oak, or a small format in light oak.

  • 218 x 25 cm planks in natural white oak
  • Matt grey oak in 218 x 19.8 cm
  • Brushed light oak from Tarkett

Watch out: On wide, long planks, unevenness and humidity show more. Brand and model are indicative and are replaced by an equivalent in the same range, subject to availability.

Difference: quoted according to the model.

Installation is quoted separately. Indicative showroom. Brand and model are replaced by an equivalent in the same range depending on availability. The MB-xxxx references identify the material in your quote.

Showroom products

Real examples from each range. Open any of them for its data sheet.

12 options

How to choose

Solid or engineered

Solid wood flooring is whole timber and reacts more to changes in humidity. Engineered parquet, with an oak top layer over a stable core, deforms less. In a beach home on the Costa del Sol, that stability counts for a lot.

Species and hardness

Pine and fir are softwoods and mark easily. Oak is harder and takes finishes from white to grey.

Format and finish

Planks 198 to 220 cm long give few joints, but need a very flat subfloor. Brushing brings out the grain and usually hides scratches better than varnish.

Thickness and subfloor

The total thickness of the engineered boards in the showroom is 11 to 14 mm; the room for sanding is set by the oak top layer, which you should check with the manufacturer. All need a dry, flat subfloor and a perimeter gap that the skirting board covers.

Common mistakes

  • Installing wood in bathrooms or areas with frequent water, or on a screed that is not yet dry.
  • Leaving no perimeter gap, so the wood pushes against the wall as it expands.
  • Choosing the colour from a small sample, without seeing a full plank.
Frequently asked questions

We answer your questions

Shall we look at it in your renovation?

We will prepare your quote with the range you choose. 2-year workmanship warranty.

WhatsApp612 286 273

We use our own and third-party cookies and similar technologies (Google, Meta, Microsoft and OpenAI) to analyse how the site is used and measure our advertising. With “Essential only”, no measurement cookies are set and Clarity and OpenAI are not activated. You can change your choice at any time via “Cookie settings” at the bottom of the page. Cookie policy